Combination
QUICK DISCONNECT & STUD MOUNT
 |
Model: QD-4 MSRP* $14.99 |
 |
Model: QD-4A MSRP* $16.99 |
| |
Model: QD-4 MSRP* $14.99 |
|
Model: QD-4A MSRP* $16.99 |
Another "Firestik" first! You must have a stud mount when you're installing your antenna.If you also have your mind on a quick disconnect, now you can enjoy both functions in one part. These QD stud mounts are heavy-duty and ready to be attached to any antenna mount with the standard 1/2" (13mm) hole. They are specifically designed to accept any 3/8"-24 threaded antenna up to 5' (152cm) in length. The total height above the mounting surface is only 2.3" (58mm), or about one-half the height of using a K-1A on a standard stud mount. With a simple push and twist motion, your antenna can be removed from your vehicle.
Model QD-4 is for use with coax cables that are finished with ring type terminals. Both the ground and center lead connections are provided for on this mount. The QD-4 requires just 1/2" (13mm) on the underside so it is the perfect choice for tight areas. Click here to see parts and assembly for the QD-4.
Model QD-4A accepts a standard PL-259 terminated coax connector. The design of the lower section has been recognized as the industry standard because of its strength and unsurpassed tolerances. That, coupled with the unique and heavy framed body of the quick disconnect, puts this product in a class of its own. Click here to see parts and assembly for the QD-4A.
All of the machined parts on both models are made with half-hard brass and finished with bright nickle-chrome. Insulators are made from rugged nylon and the hardware (bolts, washers) as well as the tension spring are fabricated with stainless steel.
