Fire-Flex^®
18ft COAXIAL CABLE ASSEMBLY
For Dual Antenna Installations

Model: K-9	Model: K-9A

The quality of your communications will never be better than what the quality of your coax. Our dual lead, co-phase harness assemblies are made from our RG-59A/U, Fire-Flex coaxial cable. They may be used on any dual antenna installation. Check out these features:

• Stranded center conductor to maximize flexibility and prevent untimely breakage.
• Shielding coverage that averages 95% to protect against RF leaks and interferrence.
• Polyvinyl center insulation for ruggedness and longivity.
• Performance that exceeds mil-spec requirements for 75 ohm RG-59A/U coax.

Our K-9 co-phase harness utilizes two 18' (5.5m) leads. One end is terminated with a PL-259 type connector to match the connector on your radio and the other two ends are terminated with ring terminals on the center conductors and spade connectors on the shields. This cable should be used in conjunction with our K-4 or R-4 stud mounts and any mounts that use either of the lug-style stud mounts.

Our K-9A co-phase harness is also made with two 18' (5.5m) leads. All three ends of this cable assembly is terminated with PL-259 type connectors. This cable is designed to be used with our K-4A or R-4A antenna studs and any mounts that use either of these SO-239 stud mounts.

If you are inexperienced in buying coax cable assemblies, you might want to read our article regarding this matter. To do so, simply click here.

WHERE TO BUY?

For Current Pricing ...See Link On Home Page for printable Manufacturers Suggested List Price Sheet.
Prices may vary at different locations.

1 Year Warranty